THE DEVELOPMENT OF 3D PRINTING MODIFICATION OF LIQUID HANDLING SYSTEM CONCEPT FOR PIPETTING SYSTEM PROCESS IN THE MEDICAL AREA

Article Sidebar

PDF
Issue
Vol. 1 No. 3 (2023): December: Diversity Logic Journal Multidisciplinary
Published: Dec 18, 2023
Keywords:
3-axis,
3D Printing,
Electromedical,
Liquid Handling,
Pippeting System

Main Article Content

Ferly Isnomo Abdi
Universitas Negeri Surabaya
Arya Mahendra Sakti
Mechanical Engineering, Faculty of Vocational, Universitas Negeri Surabaya
Diah Wulandari
Mechanical Engineering, Faculty of Vocational, Universitas Negeri Surabaya
Firman Yasa Utama
Mechanical Engineering, Faculty of Vocational, Universitas Negeri Surabaya
Dewi Puspitasari
Mechanical Engineering, Faculty of Vocational, Universitas Negeri Surabaya
Lena Citra Manggalasari
Mechanical Engineering, Faculty of Vocational, Universitas Negeri Surabaya

Abstract

Background. The development of electromedical technology in the healthcare field is increasing. However, the measurement of liquid samples in the pipetting process is still done manually which makes it highly contaminated from human hands. A Liquid Handling System (LHS) is a device used to automatically transfer fluids to prevent contamination. 3D Printing is a tool used to create creative design objects using filament material. The mechanism of this tool is similar to that of a liquid handling system but is simpler and has a smaller capacity. In the future,


Research Purpose. To determine 3D printing modification of liquid handling system for pipetting system process in the medical area.


Research Method. This research uses the research and development (R&D) method by designing and constructing a Prototype Liquid Handling System with a modified 3D Printing 3-axis, placing measuring cups and sample tubes, and designing G-Code programs and servo motor coding to test the capabilities of the designed Prototype Liquid Handling System.


Findings. Based on the functional test results of the liquid handling system using NaCl solution, the pipetting results were 0.82 ml with a processing time of 5.6 seconds. The electromedical device has a percentage error rate of 2.4% with a pulling force of 6.56 N and an injection pressure of 8.44 Pa.


Conclusion. This electromedical device will be able to automatically process extraction fluids or pipetting processes with high accuracy.

Article Details

How to Cite
Abdi, F. I., Sakti, A. M., Wulandari, D., Utama, F. Y., Puspitasari, D., & Manggalasari, L. C. (2023). THE DEVELOPMENT OF 3D PRINTING MODIFICATION OF LIQUID HANDLING SYSTEM CONCEPT FOR PIPETTING SYSTEM PROCESS IN THE MEDICAL AREA. DIVERSITY Logic Journal Multidisciplinary, 1(3), 92–97. https://doi.org/10.61543/div.v1i3.40
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

Perkasa, & G, C. A. (2019). The Book Of Digital Marketing. Makasar: Celebes Media.

Kong, F., & et., al. (2012). ‘Automatic liquid handling for life science: A critical review of the current state of the art. Journal of Laboratory Automation, 17(3), 169–185. doi:10.1177/2211068211435302.

Muzadin. (2022). Perancangan automatic pipetting system dengan festo pressure vacuum generator (PCVA). Tugas Akhir Politeknik Jakarta.

Siswono, T. Y. (2010). Penelitian Pendidikan Matematika. Surabaya: Unesa University Press.

Tanuwijaya, H. (2017). Dasar-Dasar Kontrol Posisi Pada Motor Servo. Jurnal Elektronika dan Telekomunikasi, 17(2), 29-37

Kadir, A. (2017). Pemrograman Arduino & Processing. Jakarta: PT. Gramedia.

Britannica. (2007, April 4). Rack and Pinion . Retrieved from Encyclopedia : https://www.britannica.com/technology/gear

Gome, Gilad., & et., al. (2019). Open Liquid-Handling System for Creative Experimentation with Biology. Conference: ACM International Conference on Tangible, Embedded and Embodied Interaction (TEI) at: Tempe, Arizona, USA. DOI:10.1145/3294109.3295619

Barthels, Fabian., & et.al. (2019). An Open-Source 3D Printable Liquid-Handling Workstation for Laboratory Automation in Life Sciences. SLAS TECHNOLOGY Translating Life Sciences Innovation 25(2). DOI:10.1177/2472630319877374

Elhadad, Amir A., & et.al. (2023). Applications and multidisciplinary perspective on 3D printing techniques: Recent developments and future trends. Applications and multidisciplinary perspective on 3D printing techniques: Recent developments and future trends. Materials Science and Engineering: R: Reports, Volume 156,https://doi.org/10.1016/j.mser.2023.100760.

Madyastuti, L., Qomariah, S. N., & Rohman, A. (2014). PERBANDINGAN ALAT CRANE DAN MANUAL TERHADAP DURASI TINDAKAN ANTISEPTIK INTRAOPERATIF. Journals of Ners Community Vol, 5(2).

Qomariah, S. N., & Mustai'in, M. (2014). Pemberian oksigen pra anestesi meningkatkan saturasi oksigen pada riwayat perokok. Journals of Ners Community, 5(1), 70-75.

Suroso, H., Fajriyah, N., Susila, W. D. C., & Qomariah, S. N. (2023). EDUCATION FOR NURSES WORKING IN PRE-HOSPITAL EMERGENCY CARE. SYNTHESIS Global Health Journal, 19–35. Retrieved from https://syntificpublisher.com/index.php/synthesis/article/view/9.

Bakar, A., Qomariah, S.N. (2023). Buku Ajar Komprehensif Konsep Dasar Keperawatan. Surabaya: Airlangga University Press. Diakses di https://scholar.google.com/scholar?oi=bibs&cluster=16034986898837796480&btnI=1&hl=id&authuser=1